National Hotline:0769-81680917
SITI MU series worm gear reducer box
Summary
The fuselage shape by computer aided design, calculation of worm and worm wheel torque and the life of the bearing is the most modern technology program, the most accurate it. The product has such high quality is due to the use of specific performance parameters consistency technology and strict inspection of product processing and product.
The worm
The overall shape of the worm and worm gear for the bronze "ZI" type. The shape of the reducer and the vibration amplitude of continuous improvement, the torque transmission can also be gentle, step by step. The operation status of reducer is silent, no vibration.
Chassis
Reducer chassis is die casting technology produced by modernization, material is aluminum. The chassis surface perfect smoothness to the chassis paint can be removed, because we have no paint on the chassis. Beautiful appearance and good operation are combined into one. Die cast chassis equipped with a reinforced skeleton, but does not change the body weight, and ensure that the chassis strength, hardness and surface with the surrounding environment, thermal conversion.
Bearing
From the beginning of 75, taper rolling shaft is an input shaft, which makes the backslash adjustment easier. Thus, a radial load and axial load of the input shaft is obviously improved. Reducer in the silent, vibration free operation, should not be adjusted, but also greatly reduce maintenance requirements. According to the need, taper rolling shaft can also be used as an output shaft.
Operation state
This product all is silent running, no vibration. Compared with other worm reducer, is a high performance products, and is suitable for large workload.
Reversibility
Irreversible worm reducer rotating and the irreversibility of the transform of a function, can be used as selective structure parameters. Sometimes the special use its reversibility, and some other circumstances forced irreversibility. In order to solve the customer specific requirements, recommend that you contact our engineering department.
Lubricating oil
All the worm reducer U-MU series with a lifetime of lubricating oil company SITI specified, instead of lubricating oil by synthetic oil. The use of synthetic oil in the limited conditions better improve the efficiency of.
Option
This series of all worm reducer can be on the input shaft with pre reduction device -P, pre reduction device SITI are made of aluminum die-casting technology now, with B14 flange to minimize body size. The structural design of the benefits are available as individual parts supply, assembly to the input flange. All of the M-MU series can be equipped with double worm.
Performance parameters
The input power 0.06KW ~ 17.74KW
The output torque of 12 Nm ~ 1053Nm
Reduction ratio 5/1 ~ 100/1 ~ 400/1 ~ 400/1; 75/1; 5000/1
|
SITI MU series worm gear reducer box
|
|
Summary The fuselage shape by computer aided design, calculation of the worm and worm gear torque and bearing life is using the most modern technology program, the most accurate it. The product has such high quality is due to the special performance against parameter consistency technology and strict inspection of product production processing and finished products。
Worm gear The overall shape of the worm to bronze "ZI" type. The shape of the reducer continues and the vibration amplitude were improved, the torque transmission can also be gentle, step by step. Operation status of reducer is silent, no vibration. Chassis Reducer chassis is die casting technology produced by modern, material is aluminum. The surface of the machine box perfect smoothness to the chassis paint can be removed, because we do not have the painting of the cabinet. Beautiful appearance and good operation are combined into one. Die cast chassis equipped with a reinforced skeleton, but does not change the body weight, and make sure the chassis strength, hardness and surface and the surrounding heat transfer. Bearing From the beginning of 75, taper rolling shaft used for input shaft, which makes the backslash adjustment easier. Thus, a radial load and axial load input shaft are improved obviously. Reducer in the silent, vibration free operation of state, should not be adjusted in, but also greatly reduces maintenance requirements of. According to the need, taper rolling shaft can also be used as an output shaft. The running state This product all running state are the quiet, vibration free. Compared to other worm reducer, is a highly efficient products, and is suitable for large workload. Reversibility Reversible worm reducer rotating and the irreversibility of the transform, a function can be used as selective structure parameters. Sometimes the special use and its reversibility, and other compulsory requirements of irreversibility. In order to solve the customer specific requirements, recommend that you contact our engineering department. Lubricating oil All the worm reducer U-MU series with a lifetime lubrication oil company SITI is specified, instead of lubricating oil by synthetic oil. The use of synthetic oil in the limited conditions better improve the efficiency of. Option This series of all worm reducer can be on the input shaft with pre reduction device -P, pre reduction device SITI are made of aluminum die-casting technology now, plus B14 flange to minimize body size. The structural design of the benefits are available as individual parts supply, assembly to the input flange. All of the M-MU series can be matched with the double thread worm. Performance parameters Input power 0.06KW ~ 17.74KW The output torque of 12 Nm ~ 1053Nm The reduction ratio of 5/1 ~ 100/1 ~ 400/1 ~ 400/1; 75/1; 5000/1 |
